|
Mounting points for three point front and rear belts are standard on all D-type limousines build starting from october 1962, see the Citroën drawing below. |
 |
|
Below are some photos of the safety belts (Römer-Britax, type RA72) as installed in my 1968 DS19A Pallas.
|
 |
 |
| Fig. 1 : Rear belt reel on parcel shelf | Fig. 2 : Mounting point for rear belt reel on shelf near C-pillar |
 |
 |
| Fig. 3 : Lower mounting points for rear belts. | Fig. 4 : Lower mounting points for rear belts. |
 |
 |
| Fig. 5 : Lower mounting points for rear belts. | Fig. 6 : Front belt reel under/behind drivers seat. |
|
Below are some photos of the safety belts installed in the rear of an ID Break
|
 |
 |
| Fig. 7 : Rear belt seen from the front | Fig. 8 : Mounting point for rear belt reel |
 |
|
| Fig. 9 : Mounting point on roof frame |